Installing a Sky extension point.

It’s incredibly easy to install a Sky extension point.

You will need –

• Cable – Enough to get from the back of your Digibox to the TV you want to watch sky on.
• Cable clips.
• Coax connectors – 1 x male and 1 x female connector.
• Magic Eye – Not essential, but will allow you to change channel without having to go to the Digibox to do so.
• Extra Sky remote – Again not essential, but you can guarantee that the remote is always in the other room when you want it.
  
  
• Run the cable from the RF 2 output on the back of the Digibox to the TV extension point.
• Connect the magic eye to the end of the cable, and then connect the magic eye to the TV.
• You will need to switch on the line power to the RF2 output on the Digibox.
  
  
• Press services
• Press 4
• On the handset type ‘0’ ‘1’ then ‘Select’
• This will take you into an installer menu.
• Press 4
• Scroll down to second outlet supply and switch to ‘ON’
• Scroll down to ‘Save New Settings’ and press ‘Select’
• The LED on the magic eye should now come on.